Send inquiry
| Gantry CNC cutting machine | |
| 1.Professional, stable operation | |
| 2.Nice Accuracy | |
| 3.Flame and plasma | |
| 4.Prompt shippment | |
| Gantry CNC cutting machine    | |
| Â The CNC cutting machine for the gantry structure, in LHLM-1A type gantry beams on the basis of increased section width, making the model not only in appearance more atmosphere, but also in the running on the more stable, efficient, long life the advantage of long, and can be placed in the beam plasma Xiaoxing Ji contained power supply; can be used for a variety of carbon steel, manganese steel, stainless steel and other metal materials, large, medium and small steel plate material. | |
| The gantry-type cutting machine for the structure, horizontal span of a 3m, 4m, 5m, 6m, 8m, and other specifications are driven by bilateral, stable, configuration is good, high efficiency, can be used for a variety of carbon steel, manganese steel , stainless steel and other metal materials, large, medium and small steel plate material. Can also be configured according to user requirements more than the cutting torch, cut and shaped or configured to dual-use way of cutting straight cuts, and the other optional automatic increase in power distribution system content or plasma; basic configuration: a single flame or single plasma torch with automatic ignition, automatic free increases and plasma cutting power supply. | |
| Â | |
| Model | LHLM-1B |
| Cross Beam Length | 4m |
| Longitudinal Rail Length | 6m |
| Effective Cutting Width (X axis) | 3.2m |
| Effective Cutting Length (Y axis) | 4.8m |
| Cutting Mode | Flame only; Plasma only,Flame and Plasma |
| Drive Mode | Dual-side |
| Drive Method | Rack and pinion drive for X and Y axes |
| Flame Cutting Thickness | 6-200mm |
| Plasma Cutting Thickness | 1-60mm (according to the specification of plasma power source) |
| Cutting Speed | 0-3500mm per minute |
| Moving Precision | 0.01mm per step |
| Power Source | 220V 50Hz  500-1000W |
| Cutting Gas | Acetylene, Propane |
| Plasma Gas | Pressed air, Oxygen, N2 |
| Nesting Software | INTERGNPS, FASTCAM |
| Torch Height Controller (AUTO) | CHC600(Capacitive height control for flame cutting) |
| PHC330(Arc voltage height control for plasma cutting) | |
Â