Name |
Modified PLA resin |
Product Category |
Modified PLA resin for blowing film |
Feature |
Excellent flexibility and workability. |
Degradable rate |
Fully biodegradable after 6months under composting condition. |
Color/printing |
NaturalBB601/WhiteBB602 |
Sample |
Available, sample lead time within 5 days after receive the artwork from customer |
MOQ |
20,000 pieces |
Lead time |
Commonly within 5-10 days after receiving down payment and it depends on your order quantity. |
Application |
Excellent heat sealability and printing performance. For blowing film or |
Shipment port |
Shenzhen |
Payment terms |
T/T , L/C,western union |
Conventional terms of payment |
50% deposit and full payment of copper plate,50% balance payment before shipment |
Advantage |
FDA-approved, food grade material |
Note: | |
1. Quotation offer: Please advise material, thickness, size, printing color, quantity and any other requirements you prefer. | |
2. Customized service: We accept OEM order, in fact, every design are unique, we welcome your enquiry any time! | |
3. Declaimer: The pictures relevant to these products are provided for reference only. We do not have any intellectual property rights over the trademarks displayed, and we would not sell any products contain these trademarks. |
Product property:
Typical Material & Application Properties | |||
Film Properties |
BB601/BB602 |
Method |
|
Density |
1.21-1.24g/cm3 |
ASTM D1505 |
|
Tensile Properties | |||
Tensile Strength |
MD |
31MPa |
ASTM D882 |
Elongation at break |
MD |
390% |
ASTM D882 |
MD |
112KN/m |
QB/T 1130-91 |
|
Puncture Strength |
3.5N |
GB 21303-2007 |
|
Thermal Characteristics | |||
MFR(190℃,2.16Kg) |
2.0g/10min |
ISO1113 |
|
Melting Point |
155-170 ℃ |
ASTM D3418 |
|
Electrical Properties | |||
Surface resistivity |
****** |
ASTM D257 |
|
degradation cycle |
6 months |
EN 13432 |